AIC Nozzle/Cap Assembly, Polymer, 110°, .03 Orifice, Blue, Polymer Insert

50 Mesh Screen Recommended but not Included • Molded Nozzle, Cap & Gasket

This aspirating nozzle will do an excellent job of reducing drift on broadcast applications. Fluid flow pulls air into the nozzle through the air induction ports where it mixes with the spray fluid in a mixing chamber. The result is air filled droplets that are larger than normal, which are less subject to drift. As these drops burst on the target they explode on impact into many small droplets providing good coverage and penetration. Pressure Range is 30 - 115 PSI.

For pre emerge herbicides minimum pressure is 40 psi, for posting chemicals use 80 psi or higher.

VP Models have a polymer insert and tapered edge flat spray pattern. Has EPDM gasket.

Use with CP25597 quickjet caps. (See related items.)
*AIC Models are Nozzle/Cap Assemblies