Filter, Helix MTD Series, Super Model, 2" MPT Inlet & Outlet, 263 sqr. in., 100 GPM, 3.2 PSI @ 100 GPM, Pressure Loss, 12-1/8" Width, 28-3/4" Height

These unique filters include innovative "discs" with 3 dimensional design and large surface areas to minimize cleanings. As liquid enters the filter housing, a high velocity centrifugal action occurs, spiraling heavier particles (sand, sediment, etc.) away from the disc cartridge, down to the base of the filter. These accumulated particles are then flushed from the filter via the 3/4" flush port connection at the base of the filer (flush valve is not included). The grooved discs are also very effective at filtering out soft fibrous material like algae. The filters can be installed in any orientation; however, it is preferable to install them with the 3/4" flush port at the bottom. One inlet and two FPT outlets (side and top) with threaded cap for outlet not being used. Available in three different sizes: 2", 2" super and 3" models.

Features:

• High velocity centrifugal cleaning action minimizes cleanings
  
• Large disc surface area, with three dimensional depth
  
• Particles can be flushed while filter is in operation
  
• Several color-coded discs (polyamide) available in different micron sizes: 100 micron, 130 micron & 200 micron
  
• Durable, corrosion-resistant, injection-molded housing (polyamide) with MPT inlet and outlet (Vitaulic available)
  
• Easily removable, quick clamp lid assembly (316 Stainless)
  
• EPDM Gaskets; 3/4" bottom flush port
  
• Two pressure gauge ports molded into housing
  
• Low pressure loss
  
• All units are rated to 125 PSI and 140° F.
  
• Stainless mounting brackets with hardware available for mobile applications

100, 130, & 200 micron options available. Please specify disc size when ordering. (Example: MTD-2SA - 130 = 2" NPT Super with 130 - micron discs).