Fuel Solenoid Valve, 2", Forged Bronze

Normally Closed

The Fig. 710 Solenoid Valve is a two-way, one direction flow, hung piston valve that is normally closed in the "at rest" position. The valve opens upon receipt of an electronic signal such as when a dispenser or pump is switched on. CSA certified (Non-UL). Standard in forged bronze (Stainless is available).

Features:

Operates at 120 Vac (12, 24, 240 & 480 Volt available)
Includes a continuous duty Class H standard coil
No differential pressure is required to open the valve
Connects to a 1/2"conduit
Enclosure is watertight and rated for hazardous locations - NEMA 3, 4X, 7 and 9; groups C and D
Standard with Viton® seals (Teflon available)
Has a built-in expansion relief
Maximum viscosity rating of 60 Centistokes (20 wt. oil max.)
Must be mounted with solenoid vertical and upright.
A strainer with a 100 mesh screen is required at the inlet.
Also Available in Stainless and Teflon for DEF in the same sizes.