Hand Pump, Glass-filled Polyester

For many chemicals, acetone, methanol and ethanol solvents. Supplied with a 2" bung adapter, 8' long hose, hose end nozzle with built-in syphon breaker and two-piece suction tube for 55 gallon drums. The body and components are glass-filled polyester or Ryton®, piston rod and springs are stainless. Double acting handle pumps one-half quart on each forward or backward stroke.

Capacity: 25 gallons per 200 strokes.
Max Liquid Temperature: 125 Deg. F.
Max Liquid Viscosity: 2000 SSU.
Port Diameters: Inlet 1" NPT, Outlet 3/4" MPT.
Weight: 8 lbs.

HE4 Polyester Glass Reinforced pump with Viton® internals and EPDM hose.

HPV4A Polyester Glass Reinforced pump with Viton® internals, & cross linked polyethylene hose.

HRV4A Ryton® Glass Reinforced Pump with Viton® internals, cross linked polyethylene hose and polyester suction tube. For maximum chemical resistance.

Not recommended for use with: Chlorinated hydrocarbons, and some fumigants such as Dibrom and Telone II. Not for HCL or sulfuric acids.
Products that use a petroleum based material such as diesel fuel will require pumps with Viton® internals. Methanol requires EPDM seals.
Call 1-888-677-5054 for chemical compatibility check.
Viton® is a registered trademark of DuPont Performance Elastomers