Picture of Industrial Centrifugal Pump / TEFC Motor Unit, Model 52, Cast Iron Bronze Fitted, 2.5" X 2" FPT, 7.5 HP, 3 PH, 208-230/460 Volts, 280 Max GPM, 250 GPM @ 30 PSI, 6.0" Impeller, EPDM Seal

Industrial Centrifugal Pump / TEFC Motor Unit, Model 52, Cast Iron Bronze Fitted, 2.5" X 2" FPT, 7.5 HP, 3 PH, 208-230/460 Volts, 280 Max GPM, 250 GPM @ 30 PSI, 6.0" Impeller, EPDM Seal

For Industrial Applications

2.5" x 2" FPT Ports.
Close-Coupled Motors, 3 Phase, 3500 RPM, Open Drip-Proof (ODP) or Totally Enclosed Fan Cooled (TEFC) Motors, 2 HP through 7.5 HP Available.
Standard Fitted (Iron Casing, Adapter & Impeller, Brass Wear Ring, Mechanical Seal as Noted), Max Temp 180° F., EPDM or Buna Mechanical Seals (Viton® also Available). Do Not Use EPDM Seals for Oil-Based or Solvent-Based Products (Use Buna or Viton®).
Bronze Fitted, All Bronze and All Iron Also Available.
Enclosed Impellers for Maximum Efficiency.

Note: NOT SUITABLE for use with Fertilizer. Internals are brass.
Need a fertilizer pump? Click here to view Scot's Agricultural Pumps
Many Other Models Available Including Pump Ends & Repair Kits.
S.G. = Specific Gravity. Water has Specific Gravity of 1.0 (and 8.34 Lbs./Gal). If product is heavier than water and Max. S.G. shown for pump is 1.0, then do not use or call for similar pump with additional horsepower.

Manufacturer:

SKU: SC3083K299BPE

VIEW CATALOG PAGE E3395

Save!

5% on 3
10% on 5

$3,131.00 / EA

Qty:

i h

Additional Information

Viton® is a registered trademark of DuPont Performance Elastomers.

Industrial Centrifugal Pump / TEFC Motor Unit, Model 52, Cast Iron Bronze Fitted, 2.5" X 2" FPT, 7.5 HP, 3 PH, 208-230/460 Volts, 280 Max GPM, 250 GPM @ 30 PSI, 6.0" Impeller, EPDM Seal

Shipping costs will be invoiced at time of shipment for all orders shipping to locations outside of the contiguous United States including Hawaii and Alaska. If you require a freight quote, please call us at 1-888-677-5054.

Additional Information