12 Volt Four Valve with Manifold, 3/4"

430 Series

The 430 Series Flow Back Manifold utilizes a unique ball design that relieves trapped pressure in the boom. This provides instant shutoff at nozzles and eliminates application problems.

• 0.6 Second Shutoff Time.
• Liquid from Flow Back Line Must Be Returned, Unrestricted, To The Top Of Tank
• Less Than 0.5 Amp Steady State Current Draw at 12 VDC
• Motor Available in EC (Single pole, single throw)
• Stainless Steel Ball & Stem
• Large Quick Connect Inlet Can Be Configured in a Variety of Ways
• Quick Connect Fittings Used On Outlet and Flow Back Port
• Maximum Pressure Rating of 215 PSI
• Flow Rate is 9.2 GPM (35 I/min) at a 5 PSI Drop (0.34 bar)
• Wetted Parts are Polypropylene, Stainless Steel and Viton®
• Available in 2-Way and 3-Way Versions
• Standard Spec is EC-2D Din Connector On Valve, But No Cables Included.