Quick Chem-Mix System, LESS Inductor, 6 Product Valves

Dultmeier Quick Chem-Mix system with 6 product valves (3 on each side), without the venturi inductor assembly.

Quick Chem-Mix systems are available without an inductor assembly. These units are designed to be used with an already existing cone-bottom tank with an inductor. The outlet of the Quick Chem-Mix system is plumbed into a “tee” fitting between the cone bottom tank outlet and the inductor assembly inlet. This same setup can be used on the suction side of a centrifugal pump. In this scenario, the pump creates the suction to make the system work.

QUICK CHEM-MIX Accessories:

• DUCHEM-VK Valve adder kit, includes 1-inch ball valves, 1-inch flanged elbow, flange clamp, and gasket
• DUTOTE-RINSE Plumbing kit to rinse hoses from chemical totes to the CHEM-MIX manifold valve
• DU1A30-CHEM Cone bottom tank with valve and elbow on the bottom for use with DUCHEM-MIX units with inductors included

Note: Using pump suction will require another pump/water source for the rinse water. Suction flow rates vary depending on the thickness and viscosity of the fluid. Fluids like atrazine need to be thoroughly agitated.