Roller Pump, 4-Rollers, Silver Cast®, 3/4" FPT, 1800 RPM, CW Rotation

4000 Series

Model 4001 to 1800-RPM & Model 4101 to 2600-RPM . These pumps are popular for use on gas engine powered portable sprayers, as they can run at speeds up to 2600 RPM. They will pump oils, distillates and many other chemicals. Maximum temperature is 140 Deg. F. Weight is 5 lbs.

Capacity: to 8-GPM @ 50 PSI
Shaft: 5/8" O.D. Stainless Steel
Seals: Viton®
Pump Shaft Rotation: CW when facing shaft
Super Rollers
Ports: 3/4" FPT
Max. Pressure: 150 PSI
Bearings: Shielded Ball
These roller pumps are used mainly in agriculture, park and turf management and pest control. They operate efficiently at tractor PTO speeds, will handle suspensions of non-abrasive wettable powders and will tolerate considerable wear before performance is adversely affected.

Body: Cast iron, Ni-Resist or Silver Cast®.
Seals: Viton® is standard on 1700, 4000, 6500 and 7560 Series. Buna-N is standard on the 1500 series.
Shafts: are all of Stainless Steel.
Rollers: These pumps are all supplied with a complete roller of Nylon & Polypropylene. Teflon and Buna-N rollers are available for specific applications.

XL Silver Cast® Pumps from HYPRO
Silver Cast is a new alloy developed by Hypro which is harder, wears better and is more corrosion resistant than any other casting material used in Ag Roller Pumps. These pumps will outlast cast iron models by 10 times. Use on Round-Up™ type products.

Viton® is a registered trademark of DuPont Performance Elastomers