Vacu-Boom Water Spill Containment, 12' closed loop with vacuum

Now you can capture 100% of your waste water run-off from pressure washers or mobile cleaning units. Also an ideal choice for use on accidental spill containment. For indoor or outdoor use. This is an ideal way to comply with Federal environmental laws and Storm Water regulations. The patented Vacu-Boom design allows you to capture and dispose of waste water properly and easily.

The Vacu-Boom System functions as follows: When the vacuum is turned on, the boom tightly seals itself to any hard surface like a giant suction cup forming an impervious liquid barrier. Captured waste water is drawn into the boom and travels with the airflow to the sump of the vacuum. An automatic pump-out feature on the vacuum then discharges the water to a holding tank, filter system or sanitary sewer. Spills are cleaned up and waste water is disposed of in a proper manner.

• Available in either 20' or 40' semi-circle boom lengths for sloped surfaces or 12' & 18' closed-loop circle units where surfaces are flat with no slope.
  
• Designed for use on any hard surface including concrete and asphalt. (Note: Rough surfaces will affect length of coverage and pickup).
  
• Set up or take down can be done in less than 5 minutes.
  
• Captures and extracts waste water in one process.
  
• Constructed with materials which do not absorb liquids or contaminants.
  
• Easily rinsed and cleaned after use, ready for the next application.
  
• Easy to store and transport, breaks down into 5' long sections.
  
• Good resistance to diluted acids, caustics and petroleum chemicals.
  
• Can be used without the discharge option if required for flammable or highly toxic solutions.
  

Vacuums are 110 Volt.