Vehicle Undercarriage Rinse System, 2 Pans, 230V

Drive-Through High Pressure Rinse Systems are a great way to clean the underbodies and wheel wells of vehicles or machinery. Protect your vehicle investments and increase vehicle life. Pump units are activated by thru-beam photo eyes when vehicles enter the rinse bay and shut-off as vehicles leave. No need to leave the vehicle.

Undercarriage Rinse System, Side Blast with Top Rinse or a combination of both are available to meet your needs. Vehicle operators can easily drive vehicles through the rinse process as slowly as needed for effective, high pressuring rinsing. The system is activated when vehicles enter and exit the rinse areas.

Spinning Stabilizer Nozzles are standard on all cleaning pans and feature high impact cleaning with excellent coverage for a variety of cleaning needs. Pre-spray or presoak chemical systems are also available if needed. Call for information.

UC221000 Undercarriage Rinse System is rated to 22 GPM @ 1000 PSI and features a 15 HP / 3 Phase pump/motor unite mounted on a stainless baseplate with stainless belt guard, pressure regulator, pressure gauge, (2) stainless steel, under vehicle blast pans with high impact stabilizer nozzles, electrical panel and (1) Photo eye activation set with aluminum support stands. Vehicle blast pans are designed to be mounted in the concrete and flush with the floor. High impact stabilizer nozzles are included in all pans.System is designed to run off of (3) 1/2" feed lines to each pan assembly.

Swiss Engineering & Quality on All Pan Units
High pressure feed lines from pumps to bays are available, but not included as distance from pump station to wash pans will vary by location.

* Undercarriage pan lids constructed of 1/4", 304SS and not meant for traffic use